This FAQ explains how press-locked steel grating is made, which material and surface options buyers can specify, how its main configurations differ, and what details to prepare for platforms, covers, walkways or other structures.
Press-locked steel grating is an open-grid product made by joining slotted bars under hydraulic pressure. The result is used for platforms, floors, covers, walkways, screens and other industrial or civil structures. The questions below cover the specifications buyers usually need to define before requesting a quotation.
Press-locked steel grating is made by joining two close-tolerance slotted bars with hydraulic pressure. This creates a permanent mechanical lock between the bearing bars and cross bars. The product is also called pressure-locked grating, pressed grating or pressure lock grating.
Its open grid allows drainage, ventilation and light passage. Depending on the configuration, it can be used for stair treads, platforms, walkways, trench covers, drainage covers, fences and privacy screens.
Press-locked grating comes in low carbon steel, stainless steel and aluminum. The right selection depends on the structure and the environment in which the grating will be installed.
For a quotation, state the required material together with the application, panel dimensions and surface treatment. This keeps the requested construction clear when the grating is intended for a factory floor, platform, cover or building feature.
Press-locked grating is made with a standard plain surface or a serrated surface. Serrated surfaces use teeth on the bearing bars, on both the bearing and cross bars, or on the connecting components. These configurations provide different levels of anti-slide effect.
A serrated surface is worth specifying for areas where slip resistance is an important design requirement. A plain surface can be selected where a standard smooth walking or covering surface is suitable.
Common mesh opening sizes are 33 mm × 33 mm and 33 mm × 11 mm. Bearing bar dimensions depend on the insertion mode:
These figures describe the standard ranges. The application and panel layout should be provided with the requested height, thickness, opening and length.
Heavy-duty steel grating is intended for high-load-bearing occasions. It is formed under 1,200 tons of pressure, with standard bearing bar heights from 80 mm to 200 mm and standard thicknesses of 8 mm, 10 mm and 12 mm.
A buyer specifying a heavy-load floor, platform or equipment area should provide the intended use and panel dimensions along with the required bearing bar height and thickness. The final selection should match the loads and support layout of the project.
Press-locked grating can have a galvanized, painted or powder coated finish. The product can also be supplied with a standard plain surface or a serrated surface, so the treatment and surface profile should be specified separately.
For an outdoor cover, industrial platform or building screen, include the installation environment in the request. Also state whether the project needs plain or serrated bearing bars.
Press-locked steel grating is used in factories, parks, commercial buildings and municipal engineering projects. Typical applications include floors, ceilings, platforms, fences, privacy screens, shelves, outer-wall decoration, sun visors, bridges, trench covers, drainage covers and inner or spiral staircases.
Picture a trench cover that must allow water to pass through, or a factory platform that needs an open grid for drainage and ventilation. In either case, measure the opening and support layout first, then specify the material, surface, mesh opening and bearing bar dimensions.
Include these details:
Send the application, opening dimensions, quantities and requested specification together so the grating can be matched to the project layout.
The company
Hangshun Wire Mesh Manufacture Co., Ltd is a industry-leading PIPE COATING WELDED MESH AND PETROLEUM MESH manufacturer specialized in the production and development of welded wire mesh products since its foundation in 1982. Our company has a complete set of advanced production lines with an annual production capacity of 6 million square meters; it is also equipped with testing instruments and means such as tensile testing machines, bending testing machines, and galvanizing detectors to ensure that the products…
About Us ↗Visit company website ↗Your next step
Use case, specification, quantity and delivery window: make the next conversation specific.