THE BUYER'S GUIDE / SELECTION
A buyer-focused guide to choosing a shale shaker screen. It covers how to match the screen type to your drilling conditions and your shaker model, and which specifications to confirm before you request a quote. It is based on the confirmed product descriptions for the Shale Shaker Screen range, the Steel Frame Shale Shaker Screen and the 3D (wave) Shaker Screen from Anping County Hangshun Wire Mesh Manufacture Co., Ltd.
Application fit: drilling fluid and mud purification fields such as oil drilling, horizontal directional crossing, coal bed methane, shale gas and river sludge treatment
Screen type: steel frame or composite frame, hook strip flat, or wave (3D) screen, depending on drilling conditions
Shaker compatibility: shaker brand and model, and screen panel dimensions
Mesh range: 20–325 for listed steel frame models, API 20–400 for listed 3D screen models
Screen construction: two or three layers of stainless steel wire cloth, plus frame material
Load and throughput needs: steel frame for stated bearing capacity and abrasion resistance, 3D screen for stated screening area and flow
Repairability: steel frame screen has independent small meshes and rubber-plug repair
Standards documentation: listed references (ISO 13501, API RP 13C, GBT 11648, GBT 11650) to be verified with supporting documents
A shale shaker screen sits inside a shale shaker. Its job is to separate drilled cuttings from drilling fluid (mud). Cuttings coming up from the well are coated in drilling fluid. As they are shaken across the screen, the solids stay on top and the fluid drains through, so it can go back to the tank. Anping County Hangshun Wire Mesh Manufacture Co., Ltd describes its shale shaker screens as two or three layers of stainless steel wire cloth with different meshes. The company says this layered build gives good filtering accuracy.
Shaker screens are not interchangeable. According to the product description, different screen types have different features and processing accuracy, and the choice should depend on drilling conditions. This guide sets out the checks a procurement team can make before shortlisting a screen.
The confirmed product description lists these application fields for shale shaker screens:
If your process is not a drilling-fluid or mud purification task, this guide may not apply. Confirm suitability with the supplier before you buy.
The product range lists several screen types: steel frame or composite frame screens, hook strip (flat) screens and wave screens. The two types with detailed confirmed specifications are compared below.
| Check | Steel Frame Shale Shaker Screen | 3D (Wave) Shaker Screen |
|---|---|---|
| Stated strength | Highest drilling-fluid weight-bearing among the listed types; higher strength and abrasion resistance than flat and hook strip flat screens | Improved screening structure and higher loading capacity |
| Stated throughput | Steel frame and supporting grids improve loading capacity and operational efficiency | Described as having the highest processing efficiency of the listed types; more non-blanked screening area |
| Screen layers | Two or three | Two or three |
| Listed mesh range | 20–325 | API 20–400 |
| Screen material | Stainless steel wire mesh | Stainless steel wire mesh (SS 304/316 in the parameter table) |
| Frame material | High-strength steel frame | Carbon steel |
| Repair notes | Divided into independent small meshes to limit damage spreading; can be repaired with dedicated rubber plugs |
When a steel frame screen fits: The source describes the steel frame shale shaker screen as suited to heavy drilling-fluid loads, where strength, abrasion resistance and the ability to repair damage are the main concerns.
When a 3D (wave) screen fits: The source describes the 3D shaker screen as a replacement screen with corrugations that add screening area. It fits linear, elliptical and circular motion shale shakers. The product description reports a test in which shaker capacity improved by about three times while the cut point matched a flat screen. Treat this as the manufacturer's reported result, not an independent benchmark. Ask for the test conditions if throughput is your deciding factor.
A replacement shaker screen has to fit the shaker it goes into. The confirmed steel frame specification table lists these models:
| Model | Mesh range | Dimension (W × L) | Listed shaker |
|---|---|---|---|
| SFS-1 | 20–325 | 585 × 1165 mm | MONGOOSE |
| SFS-2 | 20–325 | 635 × 1253 mm | KING COBRA |
| SFS-3 | 20–325 | 913 × 650 mm | VSM300 |
| SFS-4 | 20–325 | 720 × 1220 mm | KTL48 Series |
| SFS-5 | 20–325 | 712 × 1180 mm | D380 |
| SFS-6 | 20–325 | 737 × 1067 mm | FSI 50 & 500 & 5000 |
The 3D shaker screen parameter table lists these models:
| Model | Mesh | Dimension (L × W) | Approx. weight | Layers |
|---|---|---|---|---|
| PSS-1 | API 20–400 | 1050 × 695 mm | 6.6 kg | 2 or 3 |
| PSS-2 | API 20–400 | 1053 × 697 mm | 5.6 kg | 2 or 3 |
| PSS-3 | API 20–400 | 710 × 626 mm | 4.8 kg | 2 or 3 |
| PSS-4 | API 20–400 | 567 × 1070 mm | 5.2 kg | 2 or 3 |
Specifications can be customized. If your shaker is not shown, send its brand, model and screen panel dimensions so fit can be confirmed. Do not assume compatibility from the shaker name alone.
The confirmed specifications for the shale shaker screen range include:
The listed features include wear and corrosion resistance and ease of installation and maintenance. The manufacturer also states that the screens are free of visible defects such as bumps, deformation, flash edges, solder spatter and folding. These are supplier statements, so inspect incoming screens against your own acceptance criteria.
The product pages list these standards: ISO 13501, API RP 13C, GBT 11648 and, for the general range, GBT 11650. This list should not be read as proof of certification or third-party testing. If your project needs documented compliance, ask for the relevant test reports or certificates before you order.
If you are comparing shale shaker screens for sale or assessing a shale shaker screen supplier, request these details directly. Do not rely on general claims. Composite frame and hook strip screens appear in the product range.
THE COMPANY
Hangshun Wire Mesh Manufacture Co., Ltd is a industry-leading PIPE COATING WELDED MESH AND PETROLEUM MESH manufacturer specialized in the production and development of welded wire mesh products since its foundation in 1982. Our company has a complete set of advanced production lines with an annual production capacity of 6 million square meters; it is also equipped with testing instruments and means such as tensile testing machines, bending testing machines, and galvanizing detectors to ensure that the products…
About Us ↗Visit company website ↗YOUR NEXT STEP
Use case, specification, quantity and delivery window: make the next conversation specific.