Oct . 22, 2026 15:00 Back to list

Choosing Perimeter Safety Netting: Application Fit and Specification Checks



Anping County Hangshun Wire Mesh Manufacture Co., LtdJOURNAL / THE BUYER'S GUIDE / SELECTION

THE BUYER'S GUIDE / SELECTION

Choosing Perimeter Safety Netting: Application Fit and Specification Checks

A buyer-focused guide to choosing perimeter safety netting for helidecks and rooftop helipads. It compares the stainless steel wire rope and PVC-coated chain link options from Anping County Hangshun Wire Mesh Manufacture Co., Ltd on material, mesh construction, stated load capacity, framing and installation environment, and lists what buyers should confirm before ordering.

Choosing Perimeter Safety Netting: Application Fit and Specification Checks
AI-generated illustration; not a real product photograph, specification, operating permission or test certificate.
01

Installation environment: offshore/marine deck versus rooftop helipad

02

Material and surface: bare 316/316L, 314/314L stainless steel rope versus 316L stainless core wire with PVC coating

03

Construction: rope construction (7×7, 7×19, 1×7, 1×19) and ferrule/knotted or square rope mesh versus 50 mm × 50 mm chain link

04

Diameter: rope 2–3.2 mm (border rope 2.8 or 3.2 mm) versus wire 3 mm (4 mm coated)

05

Mesh width: ≥ 1.5 m documented for both types

06

Stated load figure and test basis: 122 kg/m² and 100 kg drop test from 1 m per UK CAP 437 (rope) versus load capacity up to 125 kg (chain link); units differ

07

Border and framing: tubular frame, modular (rope) versus 12 mm stainless rod frame in any shape or frameless cut-to-size fabric (chain link)

08

Regulatory fit: supplier states compliance with regulations such as CAP 437 and OGUK; buyer must confirm the project-specific requirement and documents

09

Installation limits: net elevation must not exceed the safety zone and obstacle limitations; net setting must prevent ejection of falling persons or objects

Choosing Perimeter Safety Netting: Application Fit and Specification Checks

Perimeter safety netting runs around a helicopter landing deck. According to the product descriptions from Anping County Hangshun Wire Mesh Manufacture Co., Ltd, it is there to catch and hold a falling person without breaking and without causing injury, and to stop personnel and equipment from going over the deck edge. The same descriptions list several places it is used: offshore oil exploration and production platforms, ship helidecks, and rooftop helipads on hospitals, hotels and other open buildings that handle cargo, emergency rescue and transfers.

This guide is for procurement teams, distributors and project buyers who need to choose between the perimeter safety netting types.

Step 1: Define your buyer constraints first

Answer these questions before you compare products:

  • Where is the deck? Offshore platform, ship, FPSO, renewables installation or a building rooftop.
  • What exposure will it face? Marine salt spray, coastal weather or an urban rooftop.
  • Which regulations apply? The supplier says its helideck perimeter safety net complies with regulations such as CAP 437 and OGUK. Your project may fall under different national or operator requirements, depending on whether it is in the United States, the Middle East, Europe or Southeast Asia. Confirm the requirement that applies and ask for supporting documents.
  • What will it mount on? Find out whether the design needs framed panels or netting that can be cut on site.
  • What load and geometry do you need? Check the deck's net width, elevation and catch-area requirements against the product data below.

Step 2: Understand the types

The supplier groups its perimeter safety netting into three types:

  1. Stainless steel wire rope perimeter safety netting
  2. Chain link fence perimeter safety net (stainless steel core, PVC coated)
  3. Sling safety netting (the general product page lists sisal and manila among the materials)

Only the first two have detailed specifications, so this guide compares only those two.

Step 3: Compare the specifications

CriterionStainless steel rope perimeter safety nettingChain link helipad perimeter safety netting
Material316 or 316L, 314 and 314L stainless steel (described as marine-grade)316L stainless steel core wire
SurfaceBare stainless steel ropePVC coated
Rope / wire diameterRope 2 mm to 3.2 mm (other diameters available); border securing rope 2.8 mm or 3.2 mmWire 3 mm; 4 mm with PVC coating
ConstructionRope 7 × 7 and 7 × 19 (main); 1 × 7 and 1 × 19 also supplied; ferrule/knotted or square rope meshChain link, 2" × 2" (50 mm × 50 mm) opening, bent ends
Mesh width≥ 1.5 m≥ 1.5 m
Stated load figureLoad bearing capacity 122 kg/m²Load capacity up to 125 kg
Stated testing100 kg drop test from 1 m height per UK CAP 437 requirementNo specific test stated
Border / frameTubular frame; modular designFramed (12 mm stainless steel rod, any shape) or frameless fabric that can be cut to size
ColourNot specifiedGreen or black
Stated service lifeUp to more than 25 years, including marine environments"Long service life" (no figure given)
Typical applicationsHelipads for oil & gas, renewables, marine, FPSOOffshore, rooftop and hospital helipads; also agricultural, industrial and commercial fencing

The two load figures use different units: kg/m² for the rope netting and kg for the chain link. They are not directly comparable. Ask the supplier to explain each figure and how it was determined before you use it in a design check.

Step 4: Match the type to the application

Consider stainless steel rope perimeter safety netting when:

  • The helideck is offshore or in a marine environment and you want uncoated stainless steel rope. The supplier describes it as suitable for helidecks in any environment.
  • You need a documented drop test result. The supplier states a 100 kg drop test from 1 m height according to UK CAP 437.
  • You prefer a modular system on tubular frames.
  • You need to choose a specific rope diameter or construction (7 × 7, 7 × 19, 1 × 7, 1 × 19).

Consider chain link helipad perimeter safety netting when:

  • You want a PVC-coated surface in green or black, for example to fit a rooftop or hospital helipad's appearance.
  • The installation needs framed panels in custom shapes, or frameless fabric cut on site.
  • A 50 mm × 50 mm chain link opening suits your catch-area design.

When neither recommendation applies: These products are also for helideck and helipad perimeters. Using them for other fall-protection systems would need separate engineering confirmation.

Step 5: Check installation limits

The rope netting specification sets two installation conditions that apply to any perimeter safety netting layout:

  • Elevation: the safety net must not exceed the elevation of the safety zone or the obstacle limitations.
  • Setting: the net must be set so that a falling person or object will not be thrown out of the net area.

These are design conditions, not installation instructions. Have the deck designer or a qualified engineer confirm the final geometry.

Step 6: Confirm packaging and commercial terms

Perimeter safety netting is wrapped in plastic film and packed in wooden cases.

Buyer checklist

  • Application and environment defined
  • Applicable regulation identified, and compliance documents requested (the supplier cites CAP 437 and OGUK)
  • Type selected: stainless steel rope or chain link (sling netting only once full data is received)
  • Material grade, diameter and construction confirmed
  • Mesh width (≥ 1.5 m documented) checked against deck design
  • Load figure and test basis confirmed in writing
  • Framed or frameless, colour and coating decided
  • Elevation and catch-area conditions checked by the designer
  • Quotation, lead time and packaging confirmed

THE COMPANY

Anping County Hangshun Wire Mesh Manufacture Co., Ltd

Hangshun Wire Mesh Manufacture Co., Ltd is a industry-leading PIPE COATING WELDED MESH AND PETROLEUM MESH manufacturer specialized in the production and development of welded wire mesh products since its foundation in 1982. Our company has a complete set of advanced production lines with an annual production capacity of 6 million square meters; it is also equipped with testing instruments and means such as tensile testing machines, bending testing machines, and galvanizing detectors to ensure that the products…

About Us ↗Visit company website ↗

YOUR NEXT STEP

Bring your brief. Start a useful conversation.

Use case, specification, quantity and delivery window: make the next conversation specific.

Share

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.